
N-ATX
SPECIFICATIONS & COMPATIBILITY

SPECIFICATIONS
-
14 L volume with 406 x 354 x 98 mm outer dimensions
-
console style case with CPU and GPU fans in the same orientation for optimal airflow
-
ATX power supply up to 160 mm
-
vertically mounted GPU with option for additional 2-slot gpu or expansion card
-
support for following motherboard sizes:
-
mini-ITX
-
mini-DTX
-
micro-ATX
-
ATX
-
"e-ATX"
-
-
support for full length triple slot graphic card, or 4-slot if using ITX sized motherboard
-
support for up to 360 mm water-cooling radiator if using ITX motherboard and up to 2-slot GPU
-
CPU coolers up to 79 mm in height
-
support for up to three 3.5" drives, and up to nine 2.5" drives
-
back of motherboard accessible for cooler and M.2 installation
-
2 front USB 3.0 ports
-
included ADT PCI-e x16 3.0 GPU riser cable
-
sturdy powder-coated steel construction - 1/1.2 mm frame with 0.8 mm side panels and 2.5 mm aluminum front/top face
-
narrow footprint - 116 mm wide with included stand – ideal for desktop installation
-
support for additional case layouts suited for water-cooling

COMPATIBILITY
Chapter I - Standard ATX configuration

MOTHERBOARD COMPATIBILITY GUIDE:
-
ATX, mini ATX, mini DTX or e-ATX (up to 275 mm wide, only with SFX PSU)
-
if using mini ITX boards please see next chapter: "Standard ITX configuration"
GPU COMPATIBILITY GUIDE:
1. Width:
-
up to triple slot (~62 mm including backplate)
2. Length:
-
default and with one 3.5" HDD - 388
-
with 120 mm AIO or radiator - 270 mm
-
with more than one 3.5 HDDs installed - 299 mm
-
with more than three 2.5 SSDs installed - 330 mm
-
with 140 mm AIO or radiator - 250 mm
3. Height:
-
default - 140 mm
- when using motherboard with RAM slots in low position – 136 mm
Notes:
* dimensions do not include PCI bracket.
* PCI-e riser cable is included with the case.
CPU COOLER COMPATIBILITY GUIDE:
1. Air cooler – up to 79 mm high
2. Water cooling radiator support:
-
block with tubes exiting from the side – up to 79 mm high
-
block with tubes exiting from the top – up to 49 mm high
-
120 mm radiator – up to 92 mm total thickness for radiator and fans and 130 mm radiator width
-
140 mm radiator – up to 92 mm total thickness for radiator and fans and 150 mm radiator width
Notes:
* 120 mm radiators can only be used with ATX power supplies up to 150 mm long or with SFX power supplies.
* 140 mm radiators can only be used with SFX power supplies.
* Please see other configurations for additional radiator compatibility up to 360 mm.
* Please see GPU compatibility for GPU dimension limits with various radiator options.
* Please see HDD compatibility for HDD dimension limits with various radiator options.
POWER SUPPLY COMPATIBILITY GUIDE:
1. ATX power supplies - up to 160 mm long
2. SFX power supplies - up to 130 mm long (SFX and SFX-L units)
Notes:
* Maximum power supply rated power is limited to 1200 W. Please do not exceed this limit.
* Please see water-cooling compatibility for radiator dimension limits with various power supply options.
HARD DRIVES COMPATIBILITY GUIDE:
1. 3.5” hard drives – up to three units; only with ATX power supplies up to 140 mm long or with SFX power supplies
2. 2.5” hard drives in lower position – 9.5 mm units with following options:
-
without any 3.5” drives – 9 units
-
with one 3.5” drive – 6 units
-
with two 3.5” drives – 3 units
-
with three 3.5” drives – one unit
Notes:
* Please see GPU compatibility for GPU dimension limits with various hard drive options.
* HDD support is limited to a few 2.5” units if using water cooling, depending on radiator + fan thickness.
CASE FANS COMPATIBILITY GUIDE:
1. Top position - one 80 mm on top of the case, up to 25 mm thick
2. Side position - one 120 or 140 mm fan on the motherboard tray. Installing fan in this position removes one 3.5" or three 2.5" hard drive positions
MEMORY STICKS:
-
UP TO 84 MM TALL
Chapter II. Standard ITX configuration

*NOTE
* for missing sections please see "Standard ATX configuration"
MOTHERBOARD COMPATIBILITY GUIDE:
1. mini ITX or wide ITX
GPU COMPATIBILITY GUIDE:
1. Width:
-
up to 4 slot (~82 mm including backplate)
-
single or dual slot if using 240 or 360 mm radiators
2. Length (for 4 slot GPUs):
-
default - 388 mm
-
or radiator - 270 mm with 120 mm AIO
-
with 3.5 HDDs installed - 259 mm
-
with 2.5 SSDs installed - 330 mm
-
with 140 mm AIO or radiator - 250 mm
3. Height:
-
default - 135 mm
-
ITX motherboard in upper position - 140 mm
Notes:
* dimensions do not include PCI bracket
* PCI-e riser cable is included with the case.
CPU COOLER COMPATIBILITY GUIDE:
1. Air cooler – up to 79 mm high
2. Water cooling radiator support:
-
block with tubes exiting from the side – up to 79 mm high
-
block with tubes exiting from the top – up to 49 mm high
-
with 120 or 140 mm radiator - up to 4 slot GPU
-
with 240 or 360mm radiator + fan combination up to 42 mm total thickness - dual slot GPU
-
with 240 or 360mm radiator + fan combination up to 62 mm total thickness - single slot GPU
-
360 mm radiators up to 136 mm wide and 400 mm long are supported
Notes:
* 120 mm radiators can only be used with ATX power supplies up to 150 mm long or with SFX power supplies.
* 140 mm radiators can only be used with SFX power supplies.
* 240 or 360 mm radiators do not limit power supply options.
* Please see GPU compatibility for GPU dimension limits with various radiator options.
* If using 240 or 360 mm radiator and reference height water cooled GPU, you will need to have water block that supports vertical tube exit
* There is 80 mm space for water cooling pump between ITX motherboard and ATX power supply, or 105 mm with SFX power supply