P-ATX SPECIFICATIONS & COMPATIBILITY

SPECIFICATIONS

  • 9L volume, 380 x 342 (343) x 69 (72) mm dimensions (overhangs from aluminum front/top face)

  • console/"pizza box" style case with CPU and GPU fans in the same orientation

  • SFX/SFX-L power supply up to 130mm (TFX or Flex-ATX with optional brackets)

  • support for following motherboard sizes:

    • mini-ITX

    • mini-DTX

    • micro-ATX

    • ATX

    • e-ATX (only with TFX or Flex-ATX supply)

  • support for full length dual slot graphic card, or triple slot if using ITX sized motherboard

  • support for 120mm AIO and 92mm with optional adapter

  • CPU coolers up to 53mm in height

  • support for up to 2 3.5" HDD's, and up to 8 2.5" SSD's or HDD's

  • up to 3 60mm case fans on top, and 1 60mm fan or 2 40mm fans on the bottom of the case

  • back of motherboard accessible for cooler and M.2 installation

  • 2 front usb 3.0 ports

  • included ADT PCI-e x16 3.0 riser cable

  • custom made power switch that integrates into case design

  • Kensington lock that also locks the left panel

  • powder coated 1 mm steel frame with 0.6mm steel side panels and powder coated 3 mm aluminum front/top face

  • small footprint - only 263 cm2 or 389 cm2 with included stand

 

COMPATIBILITY

 

GPU COMPATIBILITY GUIDE:

1. Width:

  • if using ATX, m-ATX, m-DTX or E-ATX board - max dual slot (~42mm)

  • if using ITX board - max triple slot (~62mm)

2. Length:

  • without HDD or AIO, SFX or flex supply - 370 mm

  • without HDD or with 2.5 HDD or AIO, TFX supply - 280 mm

  • with 120 mm AIO, SFX supply - 245 mm

  • with 3.5 HDD, SFX supply - 268 mm

  • with 2.5 HDD, SFX or flex supply - 300 mm

  • with 92mm AIO, SFX supply - 270 mm

3. Height:

  • if using ATX, m-ATX, m-DTX or E-ATX MBO with PCI-e x16 slot in first position - 134 mm

  • if using MBO with PCI-e x16 slot in second position - 115 mm

  • if using ITX board and 2 slot GPU - max 134 mm

  • if using ITX board and GPU wider than 2 slot - max 127 mm

Notes:

  • dimensions do not include pci bracket

  • PCI-e riser cable is included with the case.

​​CPU COOLER COMPATIBILITY GUIDE:

1. Air coolers – up to 53mm height

2. Water cooling – up to 30mm radiator thickness and up to 38 mm fan thickness

  • block with tubes exiting from the side – up to 53 mm height

  • block with tubes exiting from the top – up to 33 mm height

  • 120 mm radiator – not compatible with E-ATX board, SFX PSU only

  • 92 mm radiator – with optional bracket – E-ATX board up to 270 mm – SFX and SFX-L PSU only

Note:

  • Please see GPU compatibility for GPU dimension limits with various radiator options.

 
  • Up to 58MM tall

MEMORY STICKS

 
 

POWER SUPPLY COMPATIBILITY GUIDE:

1. SFX power supply - up to 130 mm (SFX-L support)

2. Flex ATX or 1U power supply – with optional bracket – won’t allow 3.5” hard drives

3. TFX power supply – up to 66 mm thick (fan shouldn’t protrude the casing) – with optional bracket – won’t allow 3.5” hard drives and will limit number of 2.5” hard drives placed next to GPU to 3 or 4

Notes:

  • Please see GPU compatibility for GPU dimension limits with various PSU options.

  • PSU extension cable is included with the case.

  • Please see CPU cooler compatibility for radiator dimension limits with various PSU options.

HARD DRIVES COMPATIBILITY GUIDE:

1. 3.5” hard drives – two units next to GPU held by included bracket

2. 2.5” hard drives placed next to GPU:

  • without 3.5” drives – one 7 mm 2.5” drive and six 9.5 mm 2.5” drives

  • with one 3.5” drive – one 7mm 2.5” drive and three 9.5 mm 2.5” drives

  • with two 3.5” drives – one 7 mm 2.5” drive

3. 2.5” hard drive placed over the CPU:

  • with ATX, m-ATX or E-ATX motherboards – one 9.5 mm 2.5” drive

  • with ITX or m-DTX motherboard – one 9.5 mm 2.5” drive and CPU cooler limited to 42 mm

Note:

  • Please see GPU compatibility for GPU dimension limits with various hard drive options.

 

CASE FANS COMPATIBILITY GUIDE:

​1.Fans positioned on the top side of the case – three 60 mm fans up to 25 mm thick

2.Fans positioned on the bottom side of the case:

  • with ATX or E-ATX motherboard – two 40 mm fans up to 20 mm thick

  • with ITX, m-ATX or m-DTX motherboard – two 40 mm fans up to 20 mm thick or one 60 mm fan up to 20 mm thick

Notes:

  • Please note that 40 mm fans at the bottom could obstruct some motherboard headers.

  • Fan screws are not included with the case.

 

​​1. ATX, mini ATX and mini DTX boards – max. 2 slot GPU, any supported PSU

2. Mini ITX – max. 3 slot GPU, any supported PSU

3. E-ATX – max. 2 slot GPU, only flex or TFX power supply

  • with flex power supply – boards up to 285 mm long

  • with TFX power supply – boards up to 280 mm long

  • with 92 mm radiator – boards up to 270 mm long

Notes:

  • Please see GPU compatibility for GPU dimension limits with various motherboard options.

  • Please see CPU cooler compatibility for radiator dimension limits with various motherboard options.

​MOTHERBOARD COMPATIBILITY GUIDE:

 
0

Payment method: PayPal
 

info@sfftime.com   Zagrebačka 5, 51000 Rijeka, Croatia, EU

​Orders shipping to EU: 25% VAT applied at checkout